Skip to product information
1 of 2

Custom Size Open-Top Van Slider

Custom Size Open-Top Van Slider

An open-top sliding tray built to your exact outside length and width, from 18mm Hexaply on full-extension locking runners. Enter your sizes below and your price updates straight away.

Outside sizes. Length 600–1600mm, width 400–1200mm. Height is fixed at 180mm.

Enter your sizes

Not sure on sizes? WhatsApp Dylan or read the measuring guide.

Need hexaboard cut to size as well?

Floor pieces, liners or a lid in matching 12mm or 18mm hexaboard. Add them to this order and they go on the same pallet for free.

Price your pieces →

A made-to-measure, open-top sliding tray for your van, built to the exact outside length and width you enter above. It's the same heavy-duty build as our custom drawers, just without the top, so you can stack tool cases, boxes or bulky kit on the tray and pull the whole lot out to the back doors. Every unit is CNC-cut from 18mm black Hexaply in our North Anston workshop.

  • Outside length and width made to your sizes
  • Fixed height: the sides stand 180mm tall overall
  • Inside depth of the tray: 100mm from the tray floor to the top of the sides
  • The tray floor sits 56mm above the bottom of the unit
  • Inside, the usable space is roughly 110mm less than your outside width and 100mm less than your outside length
  • 18mm black phenolic Hexaply with an anti-slip hex surface
  • Same full-extension locking runners as our drawers, rated up to 227kg (the rating reduces as runner length increases; see the load table below)
  • Open top with no dividers, so you can load it however you like

Load capacity: the runner rating includes the weight of the slider itself, so deduct its weight to get the usable payload. Planning a particularly heavy load? Get in touch before ordering and we'll advise on the best size.

Not sure of your sizes? Read our how to measure guide or WhatsApp us a photo of your van.

View full details

At a glance

Build time
7 days
Delivery
£80 inc VAT · 2–3 days
Collection
Free · S25 4JJ
Material
18mm Hexaply
Height
180mm (fixed)
Warranty
6 months

The details

What you get
  • Open-top tray and base in 18mm phenolic Hexaply, CNC-cut
  • Full-extension locking runners, rated to suit your slider length
  • Sides 180mm tall overall, with 100mm of tray depth inside
  • Fixings for securing the slider in your van are not included
Outside size vs inside space

The length and width you enter are the outside of the unit. The usable tray space is roughly 110mm less in width and 100mm less in length, with 100mm of depth inside. The tray floor sits 56mm above the bottom of the unit.

Measure the narrowest point, usually between the wheel arches, and leave a little clearance. Our measuring guide walks you through it.

Load ratings

The runner rating depends on the slider length. Ratings are for an evenly spread load with the slider fully extended.

Runner lengthRating (pair)
Up to 508mm (20")227kg
559–711mm (22–28")221–212kg
762–914mm (30–36")209–200kg
1016–1067mm (40–42")194–191kg
1219mm (48")182kg
1372mm (54")173kg
1524mm (60")167kg
How to fit it

Most customers strap it to the factory lashing points with ratchet straps or turnbuckles, so there's no drilling. You can also fix L brackets (not supplied) to an existing ply floor, or screw through the base into the floor. Fixings aren't included, as the right ones depend on your van. We don't offer fitting, but we're happy to talk you through it.

Hexaboard cut to size to go with it

Want floor pieces, liners or a lid in matching board? We cut 12mm and 18mm hexaboard to any size from 50mm up to 1200 × 2420mm, to ±2mm.

Add your pieces from the cut-to-size hexaboard page and choose "Send on the pallet with my drawers". As long as they're in the same order as your slider, they go on the same pallet with no extra delivery charge.

Delivery & returns

Built in 7 days, then delivered on a pallet to UK mainland addresses in 2–3 days for £80 inc VAT (£66.67 ex VAT). The courier calls to agree a day, so please leave a phone number at checkout. Collection from North Anston is free.

Because every slider is made to your sizes, custom sliders can't be returned for change of mind. Your statutory rights for faulty goods aren't affected. See our refund policy.

Ways to fit it

Ratchet straps
Strap to the factory lashing points. No drilling, and it moves with you to your next van.
Turnbuckles
A tighter, more permanent hold using the same lashing points.
L brackets
Fix L brackets (not supplied) into an existing ply floor.
Through the base
Screw through the carcass base into the van floor for the firmest fit.

Not sure which suits your van? Send us a photo on WhatsApp.